Service Profile Identifier (Spid) - AT&T MERLIN LEGEND Reference

System Programming
Service Profile Identifier
A Service Profile Identifier (SPID) is a unique identifier that associates a Basic
Rate Interface (BRI) line on the MERLIN LEGEND system with a particular User
Service Order Profile (USOP). The USOP contains the information needed by the
central office (CO) to provide BRI service to the line. Each SPID is provided by
the CO at subscription time. The SPID is a string of digits (O-9) that cannot
exceed 10 digits in length and can have some or all of a user's Directory
Number as a subset.
Follow this procedure to program a SPID for every BRI line in the MERLIN
LEGEND system. If a SPID is not programmed for a line, the system considers
that BRI line inactive.
Entering Programming
C o n s o l e :
PC/SPM: Type SPM
E x i t i n g W i t h o u t C h a n g e s
To exit from any screen without making changes, select
press F5 on the PC before saving your entry or menu selection.
Summary Service Profile Identifier
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure
PC Procedure
P r e s s M e n u
S y s
Press any key
System technician; system manager
Key, Hybrid/PBX
Required
System Form 3e, Outside Lines-BRl Options
None
Maximum of 10 digits in length, using digits O through 9
No
No
Lines Trunks
Dial line no.
Exit
P r o g r a m E x i t
F1 F5
Exit on the console or
More BRI ServProfId
Enter Dial SPID
Service Profile Identifier
Enter Exit
5-3