AT&T MERLIN LEGEND Reference page 152

I n d e x
forms
planning
System Form 3e, Outside Lines—BRl Options,
5-3, 5-7, 5-11
System Form 4b, Analog Multiline Telephones,
5-15
System Form 4b, Digital/lSDN Telephone, 5-15
System Form 5a, Direct-Line Console (DLC)—
Analog, 5-15
System Form 5b, Direct-Line Console (DLC)—
Digital/lSDN, 5-15
Point-to-Multipoint service, 1-5
pool access codes, 1-11
Pool button, 1-10
Pool dialout code, 1-10
pools
description of, 1-10
planning considerations, 4-8
programming considerations, 5-2
port screens, 6-1 5—6-1 9
PRI (see primary rate interface)
primary clock source, 6-13
primary loop clock source, 5-6
Primary Rate Interface (PRI), 1-3, 1-11
Print option, 5-19
private network, 1-16
Processor module, 1-4, 6-10, 6-13
Q
QCC operator to receive calls
planning considerations, 4-7
QCC queue priority, planning considerations, 4-8
Queued Call Consoles (QCCs), 1-10, 1-11, 5-14
R
RAM Failure, 6-7
Recall feature, using, 1-13, 3-19
Remove Access feature, 4-8
Reset feature, 6-4
S
secondary clock source, 6-13
Secure Telephone Unit Ill (STU
Service Profile Identifier (SPID)
errors, tracking, 6-18
planning considerations, 4-8
planning form instructions, 4-9
programming procedure, 5-4—5-8
Service Profile Identifiers (SPIDs), 1-4
single-line telephone, 2-13, 5-14
Slot menu, 6-15
Slot Status screen, 6-2
surrogate mode, programming, 5-2
System Access button, 1-10, 1-11
system alarm, 6-18
system erase, 5-6
System Inventory screen, 6-2
System Programming and Maintenance (SPM) utility,
backing up system software, 2-9
programming BRI, 5-3—5-5
upgrading system software, 2-12, 2-15
System Programming Reports, 5-19
system restart, 5-6
T
telephones
assigning buttons, 4-13-4-15
BRI Access button, using, 1-10
supported, 2-13
tertiary clock source, 6-13
time-division multiplex (TDM) clock reference, 5-6,
6-13
timers
description, 5-10
failure messages, 6-7
planning considerations, 4-12
planning form instructions, 4-12
programming BRI, 5-10—5-13
system planning, 5-14
tip/ring ports and stations, 2-13, 5-14
TDM clock, see time-division multiplex clock
transceiver failure, 6-7
transient errors, 6-18
Trunk-to-Trunk Transfer feature, 1-12
Ill), 2-13
IN-5