Bri Access Button - AT&T MERLIN LEGEND Reference

System Programming

BRI Access Button

The BRI Access button is used for the CO Transfer feature and to select a
Directory Number for which a Local Area Signaling Service (LASS) feature is
activated. However, it is not used to place or receive calls.
The BRI Access button is programmed onto one of the first ten buttons on a
multiline telephone. Only one BRI Access button can be on a telephone. The BRI
Access button can be copied from one station to another programmed station
via the Extension Copy feature.
A BRI Access button cannot be programmed onto:
Single-line telephone or other tip/ring stations.
Queued Call Console (QCC).
Except for during a CO Transfer, pressing a BRI Access button is ignored when
the telephone is off-hook.
Follow these procedures to program a BRI Access button onto a multiline
telephone. They are the same steps used for Centralized Telephone
Programming.
Entering Programming
Console: Select
PC/SPM: Type SPM
Exiting Without Changes
To exit from any screen without making changes, select Exit on the console or
press F5 on the PC before saving your entry or menu selection.
BRI Access Button
5-14
Menu
Sys Program
select any key
Exit
F1 F5