Removal Of The Pcb - Daikin FTKS20D3VMW Service Manual

Outdoor Unit
1.3

Removal of the PCB

Procedure
Step
1. Remove the service PCB
1 External appearance of
the service PCB and
the terminal board.
2 Loosen the 1 screw of
the terminal board and
open it.
3 Disconnect the
connector [S52] and
[S102] from the service
PCB.
300
Warning Be sure to wait 10 minutes or more after turning off all power supplies
before disassembling work.
Procedure
Priority room setting (SW4)
LED A
LED 1
LED 2
LED 3
LED 4
Operation mode
(SW2)
(Heating / Coolin)
Wiring error check (SW3)
Forced operation (SW1)
Night quiet mode (SW5)
SiENBE12-713
Points
Illustrations are for 3 room
model.
Removal Procedure