SiENBE12-713
" To use WEEKLY TIMER operation
7. Press "NEXT button".
•
•
8. Press "SELECT button" to select the
•
•
•
9. Press "NEXT button".
•
•
•
10. Press "
•
System Configuration
The time will be set.
"
" and the temperature blink.
desired temperature.
The temperature can be set between 10°C and
32°C.
To return to the time setting, press "BACK
button"
The set temperature is only displayed when the
mode setting is on.
The temperature will be set.
The temperature will be set and go to the next
reservation setting
Set the following using the same procedures.
button" to complete the setting.
Point the remote control toward the air conditioner and press the buttons to operate. The air
conditioner will beep and the operation lamp will flash.
Instruction
10
7, 9
8
199