Daikin FTKS20D3VMW Service Manual page 147

Instruction
" To 3-D Airflow
1. 3. Press the "SWING button
the "
" To cancel 3-D Airflow
2. 4. Press either the "SWING button
Notes on louvers angles
" ATTENTION
• Always use a remote control to adjust the louvers angles. Inside the air outlet, a fan is rotating at a high speed.
Notes on flap angle
In COOL or DRY mode
STOP
COOL
approx. 10˚~40˚
DRY
approx. 5˚~35˚
Im HEAT or FAN mode
STOP
HEAT
approx 15˚~55˚
FAN
approx 5˚~55˚
136
" and " " display will light up and the flap and louvers will move in turn.
•When "SWING button" is selected, the flaps swinging range depends on the
operation mode. (See the figure.)
Three-Dimensional (3-D) Airflow
•Using three-dimensional airflow circulates cold air, which tends to collected at
the bottom of the room, and hot air, which tends to collect near the ceiling,
throughout the room, preventing areas of cold and hot developing.
" ATTENTION
•Always use a remote control to adjust the flaps angle. If you attempt to move it
forcibly with hand when it is swinging, the mechanism may be broken.
•Be careful when adjusting the louvers. Inside the air outlet, fan is rotating at a
high speed.
" and the "SWING button
" or the "SWING button
SiENBE12-713
":
".
System Configuration