List Of Periodic Replacement Parts; Inquiries About Product And Guarantee; When Making An Inquiry; Product Warranty - Fuji Electric frenic-hvac Instruction Manual

Hide thumbs Also See for frenic-hvac:
Table of Contents

Advertisement

6.3 List of Periodic Replacement Parts

Each part of the inverter has its own service life that will vary according to the environmental and operating
conditions. It is necessary to replace the following parts at the intervals specified below as a guide.
When the replacement is necessary, consult your Fuji Electric representative.
Part name
DC link bus capacitor
Electrolytic capacitors on printed circuit boards
Cooling fans
(Notes) These replacement intervals are based on the inverter's service life estimated at a surrounding temperature of
30°C (IP55) or 40°C (IP21) at full load (100% of the inverter rated current). In environments with a surrounding
temperature higher than that or a large amount of dust or dirt, the replacement intervals may be shorter.
Standard replacement intervals mentioned above are only a guide for replacement, not a guaranteed service life.

6.4 Inquiries about Product and Guarantee

6.4.1 When making an inquiry

Upon breakage of the product, uncertainties, failure or inquiries, inform your Fuji Electric representative of the
following information.
1)
Inverter type (Refer to Chapter 1, Section 1.1.)
2)
SER No. (serial number of the product) (Refer to Chapter 1, Section 1.1.)
3)
Function codes and their data that you changed (Refer to the User's Manual, Chapter 5, Section 5.6.3.2.)
4)
ROM version (Refer to User's Manual, Chapter 5, Section 5.6.4.4.)
5)
Date of purchase
6)
Inquiries (for example, point and extent of breakage, uncertainties, failure phenomena and other
circumstances)

6.4.2 Product warranty

The product warranty period is "1 year from the date of purchase" or "24 months from the manufacturing date
printed on the nameplate," whichever date is earlier.
However, if the following cases are applicable, the terms of this warranty may not apply.
1) The breakdown was caused by inappropriate usage, repairs, or modifications.
2) The product was used exceeding the standard specification range.
3) The breakdown was caused by drops after purchase, or damages or breaks caused during transportation.
4) The breakdown was caused by a reason such as earthquake, fire, storm and flood, lightning, abnormal power
voltage and other disasters, and the secondary damages.
Table 6.2 Replacement Parts
Standard replacement intervals (See Notes below.)
6-3
5 years
5 years
5 years

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents