To Remove The Inlet Manifold And Valve - PEUGEOT TSDI Workshop Manual

To remove the inlet manifold and valve

- Remove the 4 fixing bolts (1) (one is of the
tamper-proof type)
- Remove the inlet manifold (2)
- Remove the first paper gasket (3)
- Remove the valve assembly (4)
- Remove the second paper gasket (5)
Note: The gaskets must be renewed each time they
are removed
- Check that the valve assembly blades and
support are in perfect condition
Note: the position of the limiter must be 3 mm
from the valve support
Reproduction or translation, even partial, are forbidden without the written consent of Peugeot Motocycles
DISASSEMBLY
Page: 16