To remove the oil pump
- Remove the ignition key after unlocking the
saddle
- Remove the saddle/locker assembly
- Remove the air intake
- Disconnect the oil delivery pipe (1) from the inlet
manifold (2)
- Disconnect the oil pump
- Remove the pump (4) fixing bolts (3)
- Disconnect the oil inlet pipe (5) from the pump
- Remove the oil pump
Imperative: never operate the oil pump without oil
Re-assembly: Re-assemble in the reverse order to
dismantling
Imperative: Bleed the oil pump using the diagnostic
tool (see documentation Use of the Diagnostic Tool
for the Injection Engine)
Check: Connect the diagnostic tool and check there
are no fault codes, erase them if necessary
Reproduction or translation, even partial, are forbidden without the written consent of Peugeot Motocycles
SPECIAL WORK AND PROCEDURES
Page: 41