To Remove The Magneto Flywheel - PEUGEOT TSDI Workshop Manual

- Remove turbine (11) three (10) fixing bolts
- Remove the turbine

To remove the magneto flywheel

- Hold the rotor (1) with the pin wrench
P/N 752237
- Remove the nut
- Fit protective cap P/N 68007 to the end of the
crank assembly
- Tighten flywheel extractor P/N 755985 on the
rotor
- Lock the flywheel extractor and turn the thrust
bolt until the rotor is released
Reproduction or translation, even partial, are forbidden without the written consent of Peugeot Motocycles
DISASSEMBLY
Page: 11