Disassembly Of Crankshaft Pinions; And Camshaft; Disassembly Of Inlet Pipe And Plate Valve - PEUGEOT XP6 50 Manual

DISASSEMBLY OF THE CRANKSHAFT PINIONS
AND OF THE CAM SHAFT
Put a screw (type CHC M6x1.00-25 for
example) into one of the thread holes of the
camshaft pinion, resting its end on the ribbing of
the housing case.
With the immobilixed pin in rotation, loosen the
crankshaft nut (wrench 17) and the cam shaft
nut (wrench 19) and remove them.
Disassembly of the crankshaft:
The two pinions (20 cogs and 34 cogs), the
in (note the direction of the pinion 20 z, mark
towards the nut).
The smooth washer (812.3x22x0.8), the pinion
(34 cogs) and the pin.
DISASSEMBLY OF THE INLET PIPE AND PLATE VALVE
Loosen and remove the 4 fixing screws (CHC
M6x1.00-20)
from the inlet pipe.
Disassemble the pipe and the plate sheet
(overhaul of
valve is in the chapter dedicated to the
assembly, page 19).
Disassemble the clutch lever with its spring and
washer.
Página 10 de 34