To Remove The Stator And Sensor Assembly; To Remove The Primary Transmission Cover; To Remove The Drive Pulley - PEUGEOT TSDI Workshop Manual

To remove the stator and sensor assembly

- Remove the engine speed sensor 2 fixing bolts
(2) and the stator assembly 2 fixing bolts (3)
- Remove the stator and sensor assembly (4)
- Remove the key (5) from the crank

To remove the primary transmission cover

- Remove the transmission cover 8 fixing bolts (1)
- Remove the cover and its locating pin

To remove the drive pulley

- Lock the fixed flange (2) with tool
P/N 755874
- Remove the fixed flange nut (1)
- Remove the fixed flange
- Remove the starter dog (3)
Reproduction or translation, even partial, are forbidden without the written consent of Peugeot Motocycles
DISASSEMBLY
Page: 12