To Remove The Cylinder Head And Cylinder/Piston; To Remove The Inlet Manifold And Valve - PEUGEOT MOTOR ENGINE Workshop Manual

To remove the cylinder head and cylinder/piston

- Remove the 4 cylinder head bolts and lockwashers
in the order shown
- Remove the cylinder head and its gasket
- Remove the cylinder and its gasket
- Remove one of the clips (1) with pliers P/N 752000
- Remove the gudgeon pin and the piston
- Remove the needle bearing cage

To remove the inlet manifold and valve

- Remove the inlet manifold (2) 4 bolts (1)
Remove:
- the inlet manifold
- the inlet valve and its seals
Reproduction or translation, even partial, forbidden without the written consent of Peugeot Motocycles
DISASSEMBLY
Page: 13