To Remove The Throttle Unit - PEUGEOT TSDI Workshop Manual

To remove the throttle unit

- Remove the ignition key after unlocking the
saddle
- Remove the saddle/locker assembly
- Remove the air intake (1)
- Remove the from the throttle unit to inlet manifold
clip (3)
- Remove the air filter box (5) mounting bolt (4)
- Remove the air filter box (5) and throttle unit (6)
assembly
- Disconnect the throttle unit (7)
- Disconnect the accelerator cable (2)
- Cut the plastic tie (8) holding the throttle unit to
the air filter box
- Remove the throttle unit (6)
Reproduction or translation, even partial, are forbidden without the written consent of Peugeot Motocycles
SPECIAL WORK AND PROCEDURES
Page: 35