Removal Of The Valves Or Valve Stem Seals - PEUGEOT 50 CC Workshop Manual

Removal of the valves or valve stem
seals.
- Compress the spring of one of the valves
using the valve lifter P/N 754035.
- Remove the 2 half cones (1).
- Uncompress the spring and remove the tool.
Note: Use the valve lifter provided with
adaptor P/N 758595.
Remove:
- The upper cup (2).
- The springs (3).
- The lower washer (4).
- The valve (5).
- Remove the 2nd valve in the same way.
Note: When re-installing, fit the valve
springs, the closest coils against the
cylinder head.
Note: When removing a valve, always
change the valve stem seal.
- Using tool P/N 758596, fit a new valve stem
seal.
Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Motocycles
1
DISASSEMBLY
754035
2
3
4
5
758596
15