Displaying Switchpack Definitions - Paradyne HotWire 7924 User Manual

Displaying Switchpack Definitions

7924-A2-GB20-30
Enter 4 at the Config prompt to display the definition of each position in the two
switchpacks. Switchpack definitions are also listed in Appendix C,
and Jumpers .
Config 4
Switch pack 1 definition:
1 – CO/CP
2 – Dual/Single Loop Mode
3 – Not Used
4,5 – 00, 11 Invalid
01 = Invalid, 10 = Loop Timing
6–8 – Not Used
Switch pack 2 definition:
1 – 64 Kbps
2 – 128 Kbps
3 – 192 Kbps
4 – 256 Kbps
5 – 384 Kbps
6 – 512 Kbps
7 – 768 Kbps
8 – 1024 Kbps (16x64)
All switches off = 1536 Kbps (24x64)
Config
October 1997
Customizing V.35-Compatible Units
(1x64) OFF=0, ON=1
(2x64) OFF=0, ON=1
(3x64) OFF=0, ON=1
(4x64) OFF=0, ON=1
(6x64) OFF=0, ON=1
(8x64) OFF=0, ON=1
(12x64) OFF=0, ON=1
OFF=0, ON=1
Switchpacks
OFF=CP, ON=CO
OFF=Dual, ON=Single
5-5