Worksheets; Overview - Paradyne HotWire 7924 User Manual

Worksheets

Overview

7924-A2-GB20-30
The worksheets in this appendix show the correct configuration settings based on
the types of units (DSX-1-compatible or V.35-compatible) on either end of the
HDSL connection. There are two combinations of the two types of units:
DSX-1-compatible units on both ends
V.35-compatible unit on the CP end, DSX-1-compatible unit on the CO end
NOTE:
HotWire 7924 V.35-compatible units are not designed for use at both ends of
an HDSL connection. If your application requires V.35 equipment at both
ends of an HDSL connection, consider using two Hotwire 7925 E1 HDSL
termination units. Contact your sales representative for more information.
October 1997
A
A-1