Paradyne HotWire 7924 User Manual page 9

About This Guide
Product-Related Documents
vi
Section Description
Chapter 6 Monitoring the Unit. Describes how to monitor unit status,
LEDs, and network statistics. Also describes how to monitor
the status of the unit on the opposite side of the HDSL
connection.
Testing . Provides information about available loopback
Chapter 7
tests.
Worksheets. Contains all the configuration options, default
Appendix A
settings, and possible settings to use for planning.
Cable Pin Assignments. Contains connector and interface
Appendix B
details.
Switchpacks and Jumpers. Defines the switchpack and
Appendix C
jumper positions on the board hardware. Includes board
layout diagrams.
Glossary Defines acronyms and terms used in this document.
Index Lists key terms, acronyms, concepts, and sections in
alphabetical order.
Document Number
7900-A2-GB20
7900-A2-GB21
7900-A2-GN10
7900-A2-GN20
7920-A2-GB20
7925-A2-GB20
To order additional product documentation, refer to
Information on page A at the beginning of this User's Guide.
October 1997
Document Title
HotWire Model 7900 Basic Maintenance Processor
User's Guide
HotWire Model 7900 SNMP Maintenance Processor
User's Guide
HotWire Model 7900 10-Slot Standalone Shelf
Installation Instructions
HotWire Model 7900 Nest and Options Installation
Guide
HotWire Models 7924 and 7925 T1 and E1 HDSL
Nest Card Termination Units User's Guide
HotWire Model 7925 Standalone E1 HDSL
Termination Unit User's Guide
Warranty, Sales, and Service
7924-A2-GB20-30