Paradyne HotWire 7924 User Manual page 25

Customizing V.35-Compatible
Units
Accessing Configuration Options
7924-A2-GB20-30
This chapter explains how to change configuration options for HotWire 7924-A1
models that are V.35-compatible.
DSX-1-compatible units.
Configuration option settings determine how the unit operates. You can change a
unit's configuration options by:
Selecting the Board Configuration branch of the Main Menu while in Terminal
Mode.
Changing switchpack and jumper settings on the circuit board while in
Switchpack Mode.
The Main Menu for a V.35-compatible unit on the customer premises (CP) side
appears as follows:
Command G123
ATTX – CP – T1 – LOOP AB
V.35 T1 HDSL HTUR Main Menu
1) Board Status
2) Performance Monitor
3) Board Configuration
4) Board Reset
5) CP Local Loopback
6) CP Remote Loopback
7) HTUC Menu
?) Redisplays this Menu
Command
This guide depicts the system terminal menus as they appear from a CP unit.
This is the default configuration for Model 7924 standalone units.
October 1997
Chapter 4 provides similar information for
The G123 code denotes
a successful startup
CP units are HDSL Termination
Units – Remote (HTUR)
CO units are HDSL Termination
Units – Central Office (HTUC)
5
5-1