Intended Use - Krautzberger RA 5 Operating Instruction

Automatic spray gun RA 5
Furthermore, the system owner is responsible for making sure that the machine is always in per-
fect technical condition. Therefore, the following applies:
The system owner must ensure that the maintenance intervals described in this operating
n
manual are adhered to.
The system owner must have all safety equipment checked regularly for functionality and
n
completeness.
2.6

Intended use

The spray gun serves to spray paints, colours, adhesives, glazes, enamels, release agents, as
well as other fluids. The nozzle size depends on the spray viscosity of the spray fluid.
Intended use also includes adherence to all the specifications in this manual.
Any use beyond the intended use or any other use constitutes improper use.
WARNING!
Danger due to improper use!
Improper use of the automatic spray gun can cause dangerous situations.
– Only carry out the installation and start of operations according to the steps described in
this operating manual.
– Always observe the applicable country-specific safety, accident prevention, occupational
safety, and environmental protection regulations for the area of use for the automatic
spray gun.
– Make sure that the utilised hose lines fulfil the requirements with respect to pressure,
chemical and mechanical loads.
– Do not use sharply abrasive, chemically aggressive, very hot or very cold spray media
without first consulting with and receiving approval from Krautzberger GmbH.
– Adhere to the spray media manufacturer's safety data sheets.
– Only use the manufacturer's original spare parts.
– Only operate the automatic spray gun after proper fastening on a suitable carrier con-
struction.
– Do not hold the automatic spray gun in your hand during operation.
– Only operate the automatic spray gun while adhering to the values specified in the (
Ä Chapter 12 'Technical data' on page 44).
– Make sure that the connected compressed air is oil-free and free of solid matter.
– Operate the automatic spray gun with processed, dried compressed air (air quality pur-
suant to DIN ISO 8573-1: grade 4).
– Never point the compressed air at living beings.
No claims of any type can be asserted due to damage resulting from improper use.
200-0319 ■ 200-0321 ■ 200-0323 ■ 200-0324
ENGLISH
GB–11