Paradyne 3800 User Manual page 74

The Configure branch consists of the following three
levels:
Ld EditArea frm. Allows the selection of the
Active (Operating), Active (Saved), Customer 1,
Customer 2, and Factory configuration areas.
Choose Function. Allows you to make changes
(Edit) to existing configuration options or write
(Save) these changes to either the Active (Saved),
Customer 1, or Customer 2 configuration area.
Edit Strap Group. Contains the eight software
configuration option groups that determine how the
modem operates.
Editing and Saving a Configuration Option
The following example shows how to change the
Remote Access Password using the DCP. (If you ever
intend to access another 3800 Series modem via the
Remote branch of the Top-Level menu, the Remote
Access Password must be the same for both modems.) By
following these procedures you learn how to load a
factory preset configuration area (in this case, Async
Dial), how to edit a configuration option (Remote Access
Password), and how to save changes to a configuration
area (Active (Saved)). The shaded key indicates what key
to press.
Idle : 19.2
Test
F1 F2
Select Configure from the Top-Level menu.
LdEdit Areafrm
Activ (Operating)
F1 F2
LdEdit Areafrm
Activ (Operating)
F1 F2
3810-A2-GB30-30
Configure
F3
>
F3
<
F3
September 1998
Select the Factory configuration area.
Ld Fact Preset :
Async_Dial
F1 F2
Select Async_Dial.
Choose Function
Edit
F1 F2
Select Edit.
Edit StrapGroup
DTE_Interface
F1 F2
Edit StrapGroup
Tests
F1 F2
Scroll across the LCD and select the Misc
configuration options group.
StrapsWhenDisc
Nxt No_Change
F1 F2
RemAccssPasswrd
°00000000
Nxt
F1 F2
Configure Branch
>
F3
Save
F3
>
F3
<
Misc
F3
>
F3
F3
9-5