At Command Configuration Process - Paradyne 3800 User Manual

Active (Saved)
(ATZ0, ATZ3)
ON POWER-UP, Active
(Saved) IS LOADED TO
Active (Operating)
3810-A2-GB30-30
Customer 1
(ATZ1)
LOAD Active (Operating)
USING ATZ OR AT&F
COMMAND
NOTE
Active (Operating)
CHANGES MADE USING ANY AT
COMMAND IMMEDIATELY AFFECT
MODEM OPERATION
USE AT&W COMMAND TO SAVE
CHANGES TO Active (Saved),
Customer 1, OR Customer 2
Active (Saved) Customer 1
(AT&W0) (AT&W1)
Figure 9-2. AT Command Configuration Process
September 1998
Customer 2
Factory
(ATZ2)
• Async Dial • UNIX Dial
(AT&F0) (AT&F3)
• Sync Leased
• Sync Dial
Originate
(AT&F1)
(AT&F4)
• Sync
Leased • Cellular
Answer (Mobile) (AT&F5)
(AT&F2) • Cellular
(PSTN) (AT&F6)
NOTE
THE AT&W COMMAND IS
DISABLED IF THE Straps
When Disconnect
CONFIGURATION OPTION
IS SET TO RELOAD
Customer 2
(AT&W2)
Configure Branch
494-13080-02
9-3