Paradyne 3800 User Manual page 50

Disconnect
Disconnect allows the modem to go on-hook (hang
up). Use this function when you want to disconnect an
established call on a dial line.
NOTE
When the Model 3820 is
configured for leased-line
operation, this function is not
available and is not displayed on
the LCD.
To access Disconnect from the Call Setup branch,
make the following selection:
Call Setup:
Dial Disconnect
F1 F2
Select Disconnect.
Disconnect
Command Complete
F1 F2
The modem goes on-hook (hangs up) and the call is
disconnected. This includes any calls being used for dial
backup of leased lines. The Command Complete status
message is displayed.
To exit this function and remain in the Call Setup
branch, press the key. To exit and return to the
Top-Level menu, press the
AT Command Equivalent
The AT command equivalent for Disconnect is H or
H0.
3810-A2-GB30-30
>
F3
F3
key.
September 1998
Answer
Answer allows the modem to go off-hook, generate an
answer tone, and begin the handshaking process with the
calling modem. Use the Answer function when the
Auto-Answer Ring Count configuration option is
disabled. (See the Line Dialer section in Chapter 9.)
NOTE
When the Model 3820 is
configured for leased-line
operation, this function is not
available and is not displayed on
the LCD.
To access Answer from the Call Setup branch, make
the following selections:
Call Setup:
Answer
F1 F2
Press the key until Answer is displayed. Select
Answer.
Answer
Command Complete
F1 F2
The modem goes off-hook and attempts to establish a
connection in Answer mode. The Command Complete
status message appears on the LCD.
To exit this function and remain in the Call Setup
branch, press the key. To exit and return to the
Top-Level menu, press the
AT Command Equivalent
The AT command equivalent for Answer is A.
Call Setup Branch
F3
F3
key.
5-3