Table of Contents
Advertisement
What can be done by the setting tool
For detection capability when allowable beam is configured, see next table.
Detection capability for allowable beam configuration
Allowable Beam
Disable
Lower 1 beam is enabled
Upper 1 beam is enabled
Lower 1 beam and upper 1 beam are
enabled
Lower 2 beams are enabled
Upper 2 beams are enabled
Lower 2 beams and upper 1 beam are
enabled
Lower 1 beam and upper 2 beams are
enabled
Lower 2 beams and upper 2 beams are
enabled
• Internal Indicators of F3SJ
For basic system: When fixed blanking function is enabled, emitter's BLANKING/TEST indicator is
turned on.
For muting system: When fixed blanking function is enabled, receiver's BLANKING/TEST indicator is
turned on.
Setting Change
Configure for each CH in case of a series connection.
Fixed Blanking Function
Fixed Blanking Zone Bottom Beam
Fixed Blanking Zone Top Beam
Fixed Blanking Monitoring Function
Allowable Beam
*1
When a fixed blanking zone with 3 beams or more is configured by the setting console, allowable
beams are automatically configured.
For a fixed blanking zone with 2 beams or less, allowable beams are not configured. For details, see
instruction manual of the setting console.
With the PC tool for F3SJ, perform the same settings for fixed blanking zones 2 to 5.
F3SJ-A
68
User's Manual
F3SJ-A
N14
14
23
32
Function
Initial Setting
Disable
0
0
Lockout
Disable
F3SJ-A
F3SJ-A
N20
N25
20
25
35
45
-
-
Available Setup Item
Disable/Enable
1 to Number of Beams
1 to Number of Beams
Lockout/Blanking
– (lockout only)
Zone Cancellation
See table above
[mm]
F3SJ-A
F3SJ-A
N30
N55
30
55
55
105
-
-
Setting
PC Tool For
Console
F3SJ
–
*1
Advertisement
Table of Contents
