Table of Contents
Advertisement
Appendix
PC tool for F3SJ
Appearance
Key cap for muting
Appearance
Spatter protection cover (2 cables per set, common for emitter/receiver)
Appearance
Protect bar (1 set, common for emitter/receiver)
Appearance
Protection bracket for protect bar (4)
Appearance
F3SJ-A
192
User's Manual
Model name
F39-GWUM
CD-ROM (SD Manager), branch connector, connector cap,
dedicated cable, and dedicated cable with plug are provided.
Model name
F39-CN6
Case color: Orange
Can be used for emitter and receiver
Model name
F39-HJ
In this table, the in the model indicates the same 4-digit
number as the protective height ( in the model) of the
F3SJ.When a spatter-proof cover is attached, operating range of
F3SJ is reduced by about 10%.Spatter-proof cover with 1970 or
higher of in the model is divided into 2 in combination to
use.
Model name
F39-PJ-S
One protect bar is provided in a set (common for emitter/
receiver). If both of an emitter and a receiver need a
protect bar respectively, you must purchase 2 sets. For
side mounting of F3SJ with a width of 1001mm or wider,
you must purchase protection bracket (4) for protect bar
(F39-PJ-MS).
Model name
F39-PJ-MS
Intermediate mounting bracket for side mounting using a
protect bar. You must purchase 1 set for F3SJ with
protective height from 1001 to 2000mm, or 2 sets for
F3SJ with protective height of 2009 to 2495mm.
Note
Note
Note
Note
Note
Advertisement
Table of Contents
