Preparation
You can use various functions of F3SJ and change its settings if you purchase optional accessories described
below.
Setting Console F39-MC21
Provides easy setting on site. For F3SJ-A
version 1.10 or later. Version 1.00 cannot be used.
PC Tool for F3SJ F39-GWUM
Allows functional setting through connection with your computer. It provides finer setting than the
setting console. For F3SJ-A
later.
Using the Setting Tool p.58
Setting Console
Setting console F39-MC21 consists of following units.
•Setting Console
•Branch Connector (with Connector Cap)
•Dedicated Cable
•Plugged Dedicated Cable
•Instruction Manual
Connection Procedure
Connect the setting console and F3SJ as shown below. You can connect a branch connector either on
the emitter or receiver end. Complete the wiring for F3SJ and turn it on, then change functional
settings.
If a branch connector is difficult to attach due to devices layout or other reason, use an accessory
plugged dedicated cable to communication lines (+) and (-).
For details, see instruction manual of the setting console F3SJ.
PC Tool for F3SJ
PC Tool for F3SJ, F39-GWUM, consists of following units.
N25 and N55 series, use the setting console of
□□□□
N25 and N55 series, use the PC tool for F3SJ of version 1.30 or
□□□□
Setting Console
F39-MC21
(Optional accessory)
What can be done by the setting tool
E
F3SJ-A
61
User's Manual