Installing A Module In The Upper Opening Of The Frame - Martin maxxyz modules series User Manual

5. Connect the EtherCon interconnect cable to the WING IN connector, or, if only
one module is used, connect the EtherCon Network cable (part number
11840144) to the WING IN connector.
6. Connect the Lamp bayonet plug to the "LAMP" connector. This will connect the
top illumination to the module.

Installing a module in the upper opening of the Frame

Cerebrum module
1. Use a 3 mm Allen wrench to remove the four screws that attach the blind cover
plate (if installed) to the frame.
2. The Cerebrum Module can now be placed into the top opening. Put the side strips
back on each side of the frame and fasten them in place with their screws.
Maxxyz Modules User Manual 9