Setup And Assembly; Single 'Stand-Alone' Maxxyz Module; Mounting In A Maxxyz Module Frame; Installing A Module In The Lower Opening Of The Frame - Martin maxxyz modules series User Manual

2. Setup and Assembly

There are two different methods of setting up the Maxxyz Modules: one for "stand-
alone" use and one for mounting in a Maxxyz Module Frame.

2.1 Single 'stand-alone' Maxxyz Module

Each module is shipped with protective foam attached to each side. This foam
supports the faceplate and prevents cosmetic damage to the module. Apart from
connection to the controller, the module is "ready to use" as soon as it is removed
from its packaging.

2.2 Mounting in a Maxxyz Module Frame

Installing a module in the lower opening of the Frame

1. Remove the module(s) and the module frame from their packing material.
2. Use a 3 mm Allen wrench to remove the two screws that attach the side strips to
each side of the module opening in the frame.
Maxxyz Modules User Manual 7