Martin maxxyz modules series User Manual page 10

3. Connect the Power interconnect cable to the MAINS OUT connector.
4. Connect the EtherCon Network cable (part number 11840144) to the WING OUT
connector.
5. Connect the IEC Power cable (part number 11501012) to the MAINS IN
connector.
Important! The Cerebrum Module is a controller module and must not
be connected to a Maxxyz controller, a Maxxyz Compact controller, a
Maxxyz PC or another Cerebrum using the WING OUT outputs. The
WING OUT outputs must only used to connect non-controller modules
(Programmer, Button, Submaster and Playback Modules) to the
Cerebrum.
Maxxyz Modules User Manual 10