Service manual
Repair and maintenance
Opening the M2GO HD controller
1.
Fold down the screen assembly (1) completely so
it rests on the front panel.
2.
Remove the four screws (2) on the front of the unit
using a Torx 10 key.
3.
Remove the eight screws (3) using a Torx 10 key.
There are four screws on each side of the back
side of the unit.
M1 HD - Revision A, 05-16-2017
Figure 7: Folding down the screen assembly
Figure 8: Removing screws, front
Figure 9: Removing screws, back side
1
2
3
7 of 13