M320 Multiservice Edge Router Hardware Guide
Installing the Large Mounting Shelf for the M320 Open-Frame Racks
Installing the Small Mounting Shelf for the M320 Open-Frame Racks
132
On the rear of each rack rail, partially insert a mounting screw into the lowest hole
1.
specified in
Table 74 on page 131
Install the large shelf on the rack. Rest the bottom slot of each flange on a mounting
2.
screw.
Partially insert screws into the open holes in the flanges of the large shelf.
3.
Figure 35: Installing the Mounting Hardware for a Center-Mount
Open-Frame Rack
To install the small mounting shelf:
On the front of each rack rail, partially insert a mounting screw into the lowest hole
1.
specified in
Table 74 on page 131
Install the small shelf on the rack. Rest the bottom slot of each flange on a mounting
2.
screw. The small shelf installs on the front of the rails, extending away from the rack.
The bottom of the small shelf should align with the bottom of the large shelf
for the large shelf.
for the small shelf.
Copyright © 2015, Juniper Networks, Inc.