17
-
Calibration-gas connection "C" (optional)
18
-
Zero-air connection "Z" (optional)
6.6
Adjusted operating pressure
When delivered, the METPOINT OCV has been prepared and adjusted to the operating pressure indicated by you. You
will find this setting below the type plate of the sensor unit.
Please contact us in the event that your operating conditions have changed. The BEKO service team will then adjust
your device correspondingly.
METPOINT
®
OCV
EINGESTELLTER ARBEITSDRUCK
ADJUSTED WORKING PRESSURE
PRESSION REGLÉE À
7.5 bar(g)
Technical data
17