Trouble Indications, Service Indications And Note Fields; Trouble Indications - Beko METPOINT OCV Installation And Operation Manual

13.3

Trouble indications, service indications and note fields

®
If the METPOINT OCV is operated at inadmissible operating conditions, or if service measures are due, for example,
the following communication fields can appear on the display:
• Note fields
•

Trouble indications

• Alarm indications
These indications also include the corresponding recommended actions. Please carry out the described operations.
Should this not be successful, please contact the BEKO service which is responsible for you. You will find contact
information at www.beko.de
Have system performance checks, setting and service measures exclusively carried out by authorised skilled
3
personnel .
Calibration works can only be implemented by BEKO SERVICE.
13.3.1 Trouble indications
3
Authorised skilled personnel are persons who are authorised by the manufacturer, with experience and technical training, who are
well-grounded in the respective provisions and laws and capable of carrying out the required works and of identifying and avoiding
any risks during the machine transport, installation, operation and maintenance.
Qualified and authorised operators are persons who are instructed by the manufacturer regarding the handling of the METPOINT®
OCV, with experience and technical training, and who are well-grounded in the respective provisions and laws.
METPOINT ® OCV
or on page 2.
Working pressure too low !
Please increase the operating pressure.
For minimum value see manual.
Betriebsdruck zu gering !
Bitte Betriebsdruck erhöhen.
Minimaler Wert siehe Betriebsanleitung.
Operation
51