Analogue Output 4-20 Ma - Beko METPOINT OCV Installation And Operation Manual

Operation

13.5.2 Analogue output 4-20 mA

General advice
For safe transmission and indication of the measured values, the analogue output must only be
installed and used in accordance with the instructions in this chapter.
Non-observance of the installation and operating instructions involves risks for persons and
systems.
If you have any queries regarding these instructions, please contact BEKO TECHNOLOGIES
GMBH.
This chapter applies to METPOINT
The connection for the METPOINT
1 - Two-pole M 16 flange socket for the connection of the 4-20 mA analogue output
60
®
OCV from software version 1.3.5.0 onwards.
®
OCV analogue output is at the evaluation unit (1).
METPOINT ® OCV