Note Fields; Measured Value Memory - Beko METPOINT OCV Installation And Operation Manual

At this point in the main menu, important details regarding the device and the device configuration are
available which are required during service measures.
For the service, the following fields are decisive:
NN = Number of operating hours indicating the next recommended calibration.
AOUT = Analogue output 4-20 mA active / not active

13.3.3 Note fields

13.4 Measured value memory

All measured values are documented in an internal memory (2 GB) according to date and time and can be read out
accordingly (see Chapter 12.6).
Read out the measured values of the device at regular intervals of the device's memory by means of the software.
Check these values with regard to temporary exceeding of the limit value.
METPOINT ® OCV
Use this mode only after having consulted BEKO.
Close the connection for measuring gas „M".
Connect Zero Air to „Z".
Connect measuring gas to „C".
Bitte benutzen Sie diesen Modus nur nach Rücksprache mit BEKO.
Messgas-Anschluss „M" schließen.
Null-Luft an „Z" anschließen
Messgas an „C" anschließen.
ATTENTION !
ACHTUNG !
www.beko.de
Operation
53