Table of Contents
Advertisement
XPM 80™ Thermal Printer Family
13. Technical Specifications
Technology:
Print Speed:
Resolution:
Printhead Life
Abrasion (based
on 12.5% print density)
Electrical:
Controller MTBF:
Graphic Driver:
Bar Codes:
Internally Generated:
Externally Generated:
Bar Code Scanner:
Paper Width:
Printable Width:
Paper Weight:
Paper Capacity:
Interface Type:
Operating Voltage:
Current Draw:
In standby, approx.
Typical, approx.
Cutter:
Dual-Feed Unit:
Dimensions (WxHxD):
Temperature Range
Operating:
Storage:
Humidity Range
Operating:
Storage:
Part No. D 690 019
Direct Thermal
Up to 250 mm/sec
203 dpi
100 km of paper
100 million dot pulses
>100,000 hours (Life may be adversely affected by
excessively long burn times during printing)
®
Windows
Vista/XP/7/8, Linux (CUPS)
UPC-A, UPC-E, EAN-13, EAN-8, Code 39, Interleaved
2 of 5, Code 128, Codabar, PDF 417
Any, generated by Windows
Optional; for preprinted barcodes on the bottom side of the
thermal paper
55-86 mm
(narrower widths may be possible in certain OEM applications.
Contact Hengstler for details)
80 mm
60 to 250 g/m²
6 inch (150 mm) roll diameter
12 inch (300 mm)
(reduced performance)
USB 1.1 and RS-232
(Cable length <3 meters)
(RS-232 not available with barcode scanner option)
24 VDC ±5%
100 mA typ., (depending upon options and settings)
With Hengstler paper, at 21°C ambient temperature, with a
print speed of 100 mm/sec, voltage of 24.0 VDC, and print
density (coverage) of 12.5%: <1.9 A avg.
"Pizza-cutter" type
Two paths with separate paper control buttons
142 x 132 x 224 mm (approx.)
+5ºC to +50ºC
(Wider temperature range may be possible; consult Hengstler for details)
-30ºC to +70ºC
20%-80% RH, non-condensing
10%-90% RH, non-condensing
Mod. No. 4 051015 Eli1
HENGSTLER
®
standard GDI file by host
(115,200 baud maximum)
page 31 of 32
Advertisement
Table of Contents
