Table of Contents
Advertisement
XF
eXtendo®
Thermal Printer Family
11 Technical Specifications
Technology:
Resolution:
Paper Weight:
Cutter:
Data Interfaces:
Bar Codes:
Minimum Print Length:
Temperature Range
Printhead Life
Paper Roll Capacity:
Graphic Driver:
Firmware:
Approvals:
Print Speed:
Paper Width:
Part No. D-684-399
Direct Thermal
203 dpi (8 dots/mm)
50 to 120 g/m²
50 to 160 g/m²
Hengstler Twincut Guillotine Type, full or partial cut
1.5 mio cuts
a) USB 2.0 industrial
Transmission rate: 1.5 Mbit/sec and 12 Mbit/sec
b) RS-232
4,800 to 115,200 baud
Data cable length (any) max 3 meters.
DC supply cable length max. 3 meters.
No DC building power supply; compare warnings in section
11.1 Electromagnetic Compatibility.
Any receiver inputs < 13.2 Volts
UPC-A, UPC-E, EAN-13, EAN-8, Code 39, Interleaved 2 of 5, Code 128,
Codabar
2D: PDF417, QR Code, Datamatrix, Aztec
15 mm. Note: At least 40 mm should be printed in order for the
paper to be visible. Down to 15 mm ticket length is possible to allow
for applications where the printer is used without or a chute and
where very short printouts are dropped into a bin or similar
conveyance.
Operating:
-25°C to +65ºC 20% to 85% RH non-condensing
Storage:
-30ºC to +75ºC
(versions with coated pcb upon request)
Abrasion:
150 km of paper (based on 12.5% print density)
Electrical:
150 million dot pulses
Optional Roll Holder with up to 200 mm roll diameter and 1 inch
spindle
Windows® 7/8/10, Linux (CUPS, ARM, 64-bit)
Field uploadable firmware, configuration, character sets, predefined
graphic images
CE, UL E174318 (pending)
24 VDC: up to 250 mm/sec (13.7 ips) max.
12 VDC: up to 130 mm/sec (5.1 ips) max.
54-60 mm (2.12 to 2.36 inches)
As an option a pair of paper guides is available for a 54 mm setup
(e.g., credit card formats)
Mod. No. 4 120322 Eli
(Twincut cutter; partial/full cut model)
(Twincut cutter; full cut only model)
page 32 of 35
Advertisement
Table of Contents
