Technical Specifications; General Specifications (X-56 And X-80) - Hengstler eXtendo X-56 Operating Manual

eXtendo® Thermal Printer Family

12. Technical Specifications

12.1. General Specifications (X-56 and X-80)

Technology:
Resolution:
Paper Weight:
Cutter:
Interface Types:
Bar Codes:
Internally Generated:
Externally Generated:
Minimum Print Length:
Temperature Range
Operating:
Storage:
Printhead Life
Abrasion:
Electrical
:
Paper Roll Capacity:
Graphic Driver:
Firmware:
UL - Certificate:
Part No. D-684-124
Direct Thermal
203 dpi (8 dots/mm)
50 to 120 g/m²
50 to 160 g/m²
50 to 250 g/m²
Guillotine (full or partial cut) or Rotary Type (heavy stock)
a) USB 1.1 / USB 2.0 industrial
Interface cable length 3 meters max.
Transmission rate: 1.5 Mbit/sec and 12 Mbit/sec
b) RS-232
Interface cable length 3 meters max.
4,800 to 115,200 baud

DC supply cable length max. 3 meters. No DC building power
supply; compare warnings in
Compatibility
UPC-A, UPC-E, EAN-13, EAN-8, Code 39, Interleaved 2 of 5,
Code 128, Codabar, PDF 417, QR, Datamatrix
Any, generated by Windows® standard GDI file by host
15 mm. Note: At a length of 15 mm, the paper will not be
visible at the end of the paper chute. Print at least 40 mm
in order for the paper to be visible. The 15 mm minimum
length is included to allow for applications where the printer
is ordered without the chute and where very short printouts
may be dropped into a bin or similar conveyance.
-25°C to +70ºC 20% to 100% RH (extended range) or
0°C to +50ºC 25% to 80% RH, non-condensing
-30ºC to +75ºC
100 km of paper (
100 million dot pulses
150 mm (6 inch) roll diameter
300 mm (12 inch)
recommended)
Windows® XP/7/8/10, Linux (CUPS)
Field uploadable
E174318
Mod. No. 4 270919 HW1
(Twincut cutter; partial/full cut model)
(Twincut cutter; full cut only model)
(Rotary cutter, full cut only)
section 12.4 Electromagnetic
on pg. 32.
based on 12.5% print density)
(reduced performance; debouncing mechanisms
page 30 of 33