Hengstler XPM 80 Operating Manual page 12

XPM 80™ Thermal Printer Family
Figure 5 shows the Dual-Feed Unit (DFU). The Dual-Feed Controls are used to manually
select which paper path is to be used, and to eject the paper from that path. The paper path
may also be selected under software control, or automatically when one paper source is
exhausted. The Dual-Feed controls may also be disabled by the printer configuration to
prevent manual manipulation of paper usage.
The Paper Guides can be adjusted by loosening the screws that lock them in position and
sliding them to the proper location. Please note that it is important at all times for the paper
path to be straight. Care must be taken that the paper guides cause the paper to line up
properly with the paper roll holders or the fanfold source. A crooked paper path will increase
the likelihood of paper jams. The paper path should also be centered in the printer to ensure
optimal operation.
All other user-adjustable functions and settings in the XPM 80™ are controlled by the
supplied software tools.
Part No. D 690 019
Figure 4
Mod. No. 4 051015 Eli1
HENGSTLER
page 12 of 32