Table of Contents
Advertisement
XPM 80™ Thermal Printer Family
6.
Installation
6.1. Function
Please note that the XPM 80™ printer is a module designed to be integrated into a system
and to be operated only as a part of that system, for example, in a kiosk. All technical
specifications and instructions contained in this manual and related documentation must be
considered and complied with in order to achieve successful operation in the completed
system.
6.2. Mounting Printer
The XPM 80™ printer is designed to be mounted in a vertical orientation (with printout exiting
downward, towards the ground). This vertical orientation allows gravity to help the severed
ticket fall directly into a chute or receptacle of the customer's design.
Mounting is by means of a series of hooks fabricated into the device to which the XPM 80™
will be mounted. These engage four slots in the printer frame (see Figure 7). Due to the wide
variety of different mounting possibilities and egress systems in the user's application, it's not
possible to offer one universal mounting system. Figure 7 shows a sketch and photo of the
mounting slots on the XPM 80. Please see drawing D 690 021 for details.
Part No. D 690 019
Figure 7
Mod. No. 4 051015 Eli1
HENGSTLER
page 18 of 32
Advertisement
Table of Contents
