a-3. Pickup roller
a-4. Paper feed roller
a-5. Separation roller
1) Pull out the multi manual paper feed tray unit. (See "a. Multi man-
ual paper feed tray unit")
2) Remove the actuator unit. (See "a-3. Pickup roller")
3) Unhook the claw to remove the pickup roller.
4) Unhook the claw to remove the paper feed roller.
5) Remove the separation roller cover.
6) Remove the separation roller.
AR-M550/M620/M700 DETAILS OF EACH SECTION 6 - 10
a-6. Torque limiter
1) Pull out the multi paper feed tray unit. (See "a. Multi manual paper
feed tray unit")
2) Remove the bottom cover.
3) Remove the separation roller.
4) Remove the separation roller shaft, and remove the torque limiter.
a-7. Manual feed gate solenoid
1) Remove the multi manual paper feed tray unit. (See "a. Multi man-
ual paper feed tray unit")
2) Remove the bottom cover. (See "a-6. Torque limiter")
3) Disconnect the connector, and remove the manual paper feed gate
solenoid unit.