The Bypass Tray Paper Feed Roller - Sharp MX-M260 Operation Manual

TROUBLESHOOTING AND MAINTENANCE
Cleaning the scanning glass for RSPF (only when an RSPF is installed)
If white or black lines appear in copies made with using the RSPF, use the provided
glass cleaner to clean the scanning glass for RSPF.
1
Open the RSPF and take out the glass
cleaner.
2
Clean the scanning glass with the
glass cleaner.
Scanning glass for RSPF
Use a soft cloth to gently wipe off dirt from the area on the operation
Note
panel with a mirror-like finish (shown at right). If you use a stiff cloth or
rub hard, the surface may be damaged.

THE BYPASS TRAY PAPER FEED ROLLER

If misfeeds occur frequently when feeding envelopes or other thick paper from the bypass tray, wipe the paper feed
roller at the feed slot of the bypass tray with a soft, clean cloth moistened with alcohol or water.
138
3
Return the glass cleaner to its original
position.
Bypass tray paper feed roller
Example of dirty print image
Black lines White lines
The area with a mirror-like finish is
the area that is .