Cleaning The Bypass Tray Paper Feed Roller; Cleaning The Transfer Charger - Sharp AR-5316 X Operation Manual

CLEANING THE BYPASS TRAY PAPER FEED
ROLLER
If misfeeds occur frequently when feeding envelopes, thick paper, etc. through the bypass tray, wipe the paper feed
roller at the feed slot of the bypass tray with a soft, clean cloth dampened with alcohol or water.

CLEANING THE TRANSFER CHARGER

If copies start becoming streaky or blotchy, the transfer charger may be dirty.
Clean the charger using the following procedure.
1
Turn the power switch off.
2
Open the bypass tray and the side
cover.
3
Lift and pull out the upper paper tray.
4
Take the charger cleaner out by
holding the tab.
Charger
cleaner
Paper feed roller
5
Set the charger cleaner onto the
transfer charger and gently slide the
cleaner in the direction indicated by
the arrow two or three times.
Slide the charger cleaner from one end to the
Note
other end along the groove of the transfer
charger. If the cleaner is stopped on the way,
smudges on copies may occur.
6
Return the charger cleaner to its
original position. Close the upper
paper tray. Close the side cover by
pressing the handle on the cover.
7
Turn the power switch on.
ROUTINE MAINTENANCE
If the white sheet metal is
smudged with toner,
wipe it with a soft, clean
cloth.
6
57