Send System Counter - Sharp AR-M550N Service Manual

: Feb. 9 2004
1

(3) Send system counter

Counter Mode
Accumulated G3 FAX send
number of FAX
send
Accumulated G3 FAX send
page number of
FAX send
Accumulated G3 FAX send
time of FAX send
Accumulated Scan to E-mail send
page number of SHARP DESK send
scanner scan FTP send
Accumulated Scan to E-mail send Number of mails
number of mail
send
Accumulated SHARP DESK send
number of FTP FTP send
send
Accumulated Internet FAX send
number of
internet FAX
send
Accumulated Internet FAX send
number of
internet FAX
receive
Scanner trial Internet FAX send
counter Scan to E-mail send
SHARP DESK send
FTP send
Page number of When reading
Scan to HDD SCAN TO HDD
Count event
Number of send Except for the serial transmit operation, one reservation is counted as
one communication.
For the serial transmit operation, count is made for each
communication individually.
Recall is not included.
Polling is counted as a number of send.
Total page number of In the serial transmit operation, each communication is counted as one
send individually.
In bulletin board send, the page number of send is counted.
Send time
(Including resending
time.)
Page number of scan Even in the serial transmit operation, the page number of one scan is
counted.
(The number of receivers is not counted.)
In case of a send error (excluding document jam)
• E-mail → Not counted.
• SHARP DESK/FTP → Counted.
Even in the serial transmit operation, the page number of one scan is
reached to counted.
destination servers (The number of receivers is not counted.)
Cancel and network error are not counted.
Number of send Mails transmitted by FTP send are counted in the accumulated
reached to number of mail send.
destination servers Even in the serial transmit operation, the page number of one scan is
counted.
(The number of receivers is not counted.)
Cancel and network error are also counted.
Page number of send Even in the serial transmit operation, the page number of one scan is
counted.
(The number of receivers is not counted.)
The final send result is counted.
A send error is counted.
Resend is not counted.
Cancel and CE error are not counted.
Page number of scan Even in the serial transmit operation, the page number of one scan is
counted.
(The number of receivers is not counted.)
The final send result is counted.
A communication error (except for document jam) is counted.
Cancel and CE error are not counted.
A send (transfer, F code relay broadcast) without document scan is not
counted.
Page number of scan Count is made for every scan of page.
Count is made even when send is not completed.
The operation is terminated when the count number exceeds 500.
HDD storage page
number
AR-M550/M620/M700 OTHER 12 - 2
Count-up condition
Counter reset
procedure,
clear
Sim24-10
Sim24-10
Sim24-10
Sim24-15
Sim24-15
Sim24-15
Sim24-15
Sim24-15
—
Sim24-15