Web Setting Service Mode; Operating Procedures; Entering The Web Setting Mode; Device Cloning - Sharp AR-M550N Service Manual

: Feb. 9 2004
1

2. Web setting service mode

A. Outline
The Web setting service mode provides the following functions:
• Font/Form Download

• Device Cloning

These functions are used to backup the user data and the key operator
program setting data, and to import backup data to another machine.
By using these functions, two or more machines can be set in the
same conditions in a short time.
• i-Fax Setup
This function is used to backup i-Fax receive data to the FTP server.
By using this function, receive data are backed up to the FTP server
when they cannot be printed by some reasons (paper empty, toner
empty, paper jam, etc.) and can be printed out after recovery of the
machine.
After completion of printing the backup data, they are deleted from the
FTP server.
B. Operating procedures

Entering the Web setting mode

1) Boot the browser software.
2) Enter "xxx.xxx.xxx.xxx(IP address)/xxxx_xxxxx.html" and press
ENTER key.
3) Enter the user name and the password, and press OK button.
Note: The default user name and the default password are as follows:
User name: service
Password: shArp
The password can be optionally changed in the following procedures:
1) Enter "xxx.xxx.xxx.xxx(IP address)/password_setting.html" and
press ENTER key.
2) Enter a new password.
3) Enter the new password again in the check column.
4) Press SUBMIT button.
C. Details
(1) Font / Form Download
(Font download)
1) Press "xxx.xxx.xxx.xxx(IP address)/font_down.html" and press
ENTER key.
2) Enter the user name and the password, and press OK button.
3) Select "Download" menu.
4) Select Resourced type.
5) Select Storage Device.
6) Select Font file.
7) Press "Download" button.
(Check or delete of downloaded font)
1) Press "xxx.xxx.xxx.xxx(IP address)/font_down.html" and press
ENTER key.
2) Enter the user name and the password, and press OK button.
3) Select Management menu.
The list of downloaded fonts and the used percentage of the font area
in the memory device are displayed.
Press "Initialize" button and press Yes key, and the downloaded fonts
will be deleted.
(2) Device Cloning
(Backup)
1) Press
press ENTER key.
2) Enter the user name and the password, and press OK button.
3) Select an item to be backed up. (Application / Key operator setting)
4) Press Execute key.
5) Press Save button. (File download mode)
6) Select the destination of save.
7) Press Save button.
AR-M550/M620/M700 OTHER 12 - 7
"xxx.xxx.xxx.xxx(IP address)/device_cloning.html" and