Fusing Drive Section; Fusing Drive Unit; Fusing Motor - Sharp AR-M550N Service Manual

: Feb. 6 2004
1
(2) Maintenance and parts replacement

[Fusing drive section]

(Replacement parts)
No. Unit
a

Fusing drive unit

b
a. Fusing drive unit
1) Remove the fusing unit. (See "a. Fusing unit" in the "6. Fusing sec-
tion")
2) Remove the fusing motor. (See "b-1. Fusing motor" in this section)
3) Disconnect the connector and remove the harnesse clamp.
4) Remove the fusing drive unit.
1
∗ Remove the screw which was indicated with the arrow mark.
Parts
1 Paper exit motor 1
2 Paper exit motor 2
1

Fusing motor

a-1
a-2
a
AR-M550/M620/M700 DETAILS OF EACH SECTION 6 - 134
a-1. Paper exit motor 1
a-2. Paper exit motor 2
1) Remove the fusing unit. (See "a. Fusing unit" in the "6. Fusing sec-
tion")
2) Remove the fusing drive unit. (See "b-1. Fusing motor" in this sec-
tion)
3) Disconnect the connector, and remove the fusing drive frame.
1
b-1
4) Remove the paper exit motor 1 (A) and the paper exit motor 2 (B).
b-1. Fusing motor
1) Remove the rear cabinet and the rear cabinet upper.
1
B
A