Measurement Of Thermocouple With Two Sensors; Measurement Of Combined Sensors (Sensor 1 = Tc And Sensor 2 = Rtd); Measurement Of Resistance (Linear) With One Sensor - PR 5350 Configuration Manual

2.6.4 Measurement of thermocouple with two sensors:

PRIMARY_VALUE_UNIT . . . . . . . = K, °C, °F or °R
LIN_TYPE . . . . . . . . . . . . . . . . . . . . = Any TC
LIN_TYPE_2 . . . . . . . . . . . . . . . . . = Any TC
SENSOR_MEAS_TYPE. . . . . . . . . = Anything, but not "PV = SV_1, SV_2 not available"
SENSOR_CONNECTION . . . . . . . = N/A (ignored in setup check)
SENSOR_CONNECTION_2 . . . . . = N/A (ignored in setup check)
RJ_TYPE . . . . . . . . . . . . . . . . . . . . . = No RJ, Internal, External (constant value) or Sensor 2-wire
Connections:

2.6.5 Measurement of combined sensors (Sensor 1 = TC and Sensor 2 = RTD):

PRIMARY_VALUE_UNIT . . . . . . . = K, °C, °F or °R
LIN_TYPE . . . . . . . . . . . . . . . . . . . . = Any TC
LIN_TYPE_2 . . . . . . . . . . . . . . . . . = Any RTD
SENSOR_MEAS_TYPE. . . . . . . . . = Anything, but not "PV = SV_1, SV_2 not available"
SENSOR_CONNECTION . . . . . . . = N/A (ignored in setup check)
SENSOR_CONNECTION_2 . . . . . = 2- or 3-wire
RJ_TYPE . . . . . . . . . . . . . . . . . . . . = No Reference Junction, Internal, External (constant value)
Connections:

2.6.6 Measurement of resistance (linear) with one sensor:

PRIMARY_VALUE_UNIT . . . . . . . = Ohm or kOhm
LIN_TYPE . . . . . . . . . . . . . . . . . . . . = No linearisation
LIN_TYPE_2 . . . . . . . . . . . . . . . . . = N/A (ignored in setup check)
SENSOR_MEAS_TYPE. . . . . . . . . = PV = SV_1, SV_2 not available
SENSOR_CONNECTION . . . . . . . = 2-, 3- or 4-wire
SENSOR_CONNECTION_2 . . . . . = N/A (ignored in setup check)
RJ_TYPE . . . . . . . . . . . . . . . . . . . . . = N/A (ignored in setup check)
Connections:
14
Connections with two sensors
can be configured for
2 measurements, difference,
average or redundancy
Connections with two sensors
can be configured for
2 measurements, difference,
average or redundancy