Changing Seating And Cargo Bed - Kubota RTV1140 CPX Operator's Manual

30 SEATING AND CARGO BED

CHANGING SEATING AND CARGO BED

To avoid personal injury:
A Be sure to lower the cargo bed, stop the engine
and apply the parking brake before changing
seating and cargo bed.
C 2 row seating to 1 row seating
1. Unhook the upper and lower latches on both sides of
the screen, and slide the screen forward.
(1) Upper latch
(2) Lower latch
(3) Screen
2. Hook the upper and lower latches on both sides
securely.
(1) Upper latch
(2) Lower latch
(3) Screen
(A) "PULL"
(B) "TURN"
(C) "PULL"
(D) "FORWARD"
(A) "PULL"
(B) "TURN"
(C) "RELEASE"
(D) "PUSH"
3. Unhook the seat latches and flip up the rear seat
forward.
(1) Seat latch
(2) Rear seat
A To avoid damage to the rear seat, make sure that the
seat belt receivers are set level against the seat as
shown in the left-side figure below.
(1) Seat belt receiver
(A) "UNHOOK"
(B) "FLIP UP"