Kubota RTV1140 CPX Operator's Manual page 33

2. Set the range gear shift lever to the
"NEUTRAL" position.
(1) Range gear shift lever
(H) HIGH Range
(M) MEDIUM Range
3. Lock the hydraulic lift cylinder lever to
the "NEUTRAL" position with a
restricting plate by tightening knob bolt.
(1) Hydraulic lift cylinder lever
(2) Restricting plate
(3) Knob bolt
(L) LOW Range
(R) "REVERSE"
(N) "NEUTRAL" POSITION
(A) "LOCK"
OPERATING THE ENGINE
4. Push the speed control pedal down
about 1/2 way.
(1) Speed control pedal
5. Insert the key into the key switch and
turn it "ON".
( ) "OFF" (Engine-Stop)
( ) "ON" (Engine-Run)
(A) "INCREASE"
(B) "DECREASE"
( ) "GLOW" (Preheat)
( ) "START" (Engine-Start)
11