SUPERSERVER 8048B-TR3F/C0R3FT User's Manual
Installing Hard Drives into the Drive Tray
1. Open the chassis cover.
2. Locate the drive tray you want to replace and pull the tray release tab for the
slot.
Release Tabs
3. Push the drive tray toward the front of the chassis (Figure 6-6).
4. Place the hard drive to the hard drive tray. The hard drive can be SAS or
SCSI depending on your motherboard. The hard drive may not completely fi ll
the tray (Figure 6-7).
5. Secure the hard drive to the tray with four screws from the bottom.
6. Slide the hard drive into the chassis until the tray clicks into place.
7. Repeat these steps for each hard drive tray.
Figure 6-6: Remove Drive Tray
Drive Tray
6-6